How to Charge Battery Fast?

Having to charge your phone constantly is frustrating. If your use is above average, it is unlikely that your smartphone be able to do it throughout the day without an energy boost at the beginning of the night. Unfortunately, the routine of charging twice a day shows no signs of dying anytime soon. To the extent that the capacity of the battery increases, it also increases the power of the applications and the operating system in constant evolution. It’s a stalemate.

Although the introduction constant of USB cables-C is decreasing in the time necessary to give your device a little more energy, stay close by while your battery if reenergiza can be tortuous.

But do not worry, there are some tips, tricks and gadgets that can make the loading experience less painful. Here are tricks of faster loading that you have not used, but it should.

Load Faster the Battery in Airplane Mode

One of the biggest eaters of your battery is the network signal. As a general rule, the worse the signal, the faster the battery will be drained. Consequently, if you live in an area with a signal is bad, the charging of your phone is more time-consuming than if you reside in a place with a strong signal, since the signal is consuming your energy while you load.

The quick solution? Put the phone in Airplane Mode before you charge it. Tests suggest that it can reduce the time required for a full charge in up to 25%. To put your phone in Airplane Mode, simply swipe down on the notification bar with two fingers and touch the icon for Airplane Mode. Just make sure you turn off the airplane mode again when the battery is full.

Turn off Your Phone is the Best Accelerator Battery Charge

Simple, obvious, but often overlooked. If your phone is off during charging, it will be loaded much faster. Nothing will be spent with the battery while you carry it. Use this in moments of despair, especially when you need to exit the cell quickly and need a lot of load fast.

Make Sure That the Charging Mode is Enabled

Your Android device allows you to specify the type of connection that it makes when you connect a USB cable. In more recent versions of Android, it is hidden in the menu “developer Options”.

To access the developer options, you must first activate them. To do this, go to Settings -> About phone -> build Number. Quickly tap the build number seven times. After the first two keystrokes, the device displays a countdown on the screen to the number of taps you need to rest.

Then, go to Settings -> developer Options -> Select USB configuration. In the list of options, make sure that the loading is selected.

Use a Wall Outlet to Charge the Device Faster

Using a USB port on your computer or in your car leads to a loading experience much more inefficient. Typically, the USB ports without wall socket only offer a power output of 0.5 A. The charging wall outlets usually will give you 1A (depending on your device). There is nothing wrong in receiving an amperage rating lower because it does not harm your device, but you will definitely be playing with it for a long time.

Buy a Power Bank/External Battery

If you need to recharge your smartphone while on the move, for example, if you’re traveling throughout the day, an external battery can be a lifesaver. Many power banks offer the same output amperage than a wall outlet and, in some cases, even more. But a word of warning, while your phone can charge faster with an output of two amps, you need to make sure that your USB cable can handle the extra power.

Avoid Wireless Charging to Charge Faster

I’m not going to criticize the chargers, wireless – they involve less cables, and is something that I’m sure we can all take advantage of. However, if the loading speed is its number one priority, you should avoid them. They offer a loading experience considerably slower than their counterparts with wire. Indeed, the tests suggest that there may be up to 50% slower.

Why? There are two reasons. First, it is more efficient to transfer energy by means of a cable than through a mere contact. In the second place, the wasted energy is manifested as excess heat.

Remove the Cover of the Phone to Charge Faster

All smartphones today are equipped with lithium-ion batteries. The chemistry behind the way they work determines that the loading process to run much more efficient when the battery is cold. For a loading ideal, the battery temperature (not air temperature) shall be between 5 ° C and 45 ° C. Obviously, the temperature of the battery is in part controlled by ambient temperature, and the removal of the capinha mobile phone will help you set it down. The temperature issue applies both to the heat and the extreme cold, so I put the phone in the fridge to load.

 

Use a High Quality Cable to Charge Your Device Faster

The difference in quality between the two cables can be large. Inside your charging cable single, there are four wires: red, green, white and black. The cables white and green are for data transfer, red and black wires are for charging. The number of amplifiers that the two charging cables can carry is determined by its size. A standard cable 28 can carry about 0.5 amperes and a cable longer 24 you can take two amps.

Usually, the cheap cables use setup 28, resulting in loading speeds slower. If you want to test your cable for charging efficiency, download a management app battery charge. It allows you to measure the rate of loading and unloading of your device.

What charging tips do you have? I’d love to know what else you would add to this list. You have found a setting on Android that considerably alters the amount of time required to recharge the battery? You know a gadget that your fellow readers can purchase to facilitate the loading process?

As always, you can leave your tips and suggestions in the comments below.